Monday, September 30, 2019
Data flow diagram Essay
Current state of Technology, statement of the major and minor problems, general and specific objectives, scope and limitation are introduced and discussed in this documentationââ¬â¢s chapter 1. Theoretical framework is stated in chapter 2. This chapter 2 is where methodologies including references and models used in developing Sales and Inventory System are discussed. Essential discussion and introduction for Prosight Eyecare Provider Sales and Inventory System are stated in chapter 3, as well as the diagram needed in developing effective and normalized database and the system itself. Eyecare Provider Inventory and Sales System is an inventory system and Sales System that small business transaction . This is to handle sales, purchasing and inventory management. It helps to organize customer purchase order, By using this, Prosight Eyecare Provider Inventory and Sales System, business can helps for less effort. It offers faster and quicker inventory management that counts the movement of stocks for all the accounts and transaction made. 1.2 Statement of the Problem. Develop module to return products include replacement for returned items automatically. To develop modules to void item need administrator for reduce to purchase an item. To develop modules to purchase item need type a product code for include a purchase order and it computes as well. To develop modules to received a purchase products for show of all purchase every invoice. Scope and Limitation The system is all about Prosight Eyecare Provider Sales and Inventory System. The scopes of the system are the following: Tracking of purchase order, receiving purchase order and return of products to supplier. All transaction will be recorded. Reports needed for the inventory can also be generated by the system. The system is capable of tracking and monitoring of stocks. Inventory will be automatically calculated for every transaction that may affect the inventory. Reorder point is also generated by the system. Purchase item it will be automatic put the inventory records The systemsââ¬â¢ functionality will only be limited for the sales and inventory of Prosight Eyecare Provider. Accounting system of the business is not included in the system.
Sunday, September 29, 2019
Environmental Pollution Essay
Environmental pollution is not a new fact. It is one of the biggest problems the world faces today. It is a big matter which is disturbing us economically, physically and our normal life. According to the Scott Forseman, pollution is defined as the addition of any substance of form of energy to the environment at a rate faster than the environment can accommodate it by dispersion, decomposition, recycling or storage in some harmless forms. Our precious earth is daily polluted in a variety of ways such as air pollution, water, soil, chemical, smoke, noise, radioactive, thermal, waste, energy, oil and urban pollution. Pollution began to draw major public attention in the United States between the mid-1950s and early 1970s, when the congress passed the clean air act, clean water act and National Environmental Policy act. (W.A Andrews and D.K Moore).It was the industrial revolution that gave the birth to environmental pollution as we know it today. Growing evidence of local and global pollution and an increasingly informed public over time have given to environmentalism and the environmental movement, which generally seek to limit human impact on the environment. Scientists believe that all cities with populations exceeding 50,000 have some degree of air pollution. In this essay I will show that how human activities are producing pollution which is negatively affecting the whole world and environment and there are also two main solutions for this problem why it needs to be addressed. Pollution is causing by a lots of activities we do every day. Global economic production creates global pollution .Burning fossil fuels to run factories, motorized vehicles and power plants are producing huge amount of pollution everyday. Motor vehicles produce high level of Carbon monoxide (CO) and major source of hydrocarbons (HC) and nitrogen oxide (NO) which is very harmful for our environment. The other major cause is fertilizers using in the crops, it also creates pollution because it negatively affect the human health, water and the plants. One another type of pollution is oil pollution in the oceans. It is release of liquid petroleum hydrocarbon in the environment due to the human activities.
Saturday, September 28, 2019
Operation Of Electrical Equipment In Hazardous Environment Environmental Sciences Essay
Based on my research up to day of the month I came to the decision that risky countries is a large subject to cover and after a series of meetings with my supervisor Mr. Jerry Duggan I have decided to concentrate preponderantly on ââ¬Å" Dust Explosion â⬠a subject which has ne'er been covered before by an electrical technology pupil in Cork Institute of Technology. By finishing this undertaking my purpose is that it will function as an educational tool in our progressive environment for me and for future readers. I hope to larn many things from this undertaking that will profit me in the hereafter and in my calling. I intend to analyze all the of import facets of dust detonation, by reexamining bing literature on the topic, hunt of appropriate web sites and by a possible site visit to a chemical works near me.1 Introduction:In Electrical technology, a risky location is defined as a topographic point where concentrations of flammable gases, bluess, or dusts may happen. Electrical equipment that must be installed in such locations is particularly designed and tested to guarantee it does non get down an detonation, due to curving contacts or high surface temperature of equipment. For illustration a family light switch may breathe a little, harmless seeable flicker when shift ; in an ordinary ambiance this discharge is if no concern, but if a flammable vapor was present, the discharge might get down an detonation. Electrical equipment intended for usage in a chemical mill or refinery is designed non to bring forth any flickers, or else to safely incorporate the discharge and do certain it can non light any explosive gases, bluess or dusts that might be present around the equipment. Many schemes exist for safety in electrical installings. The simplest scheme is to minimise the sum of electrical equipment installed in a risky country, either by maintaining the equipment out of the country wholly or by doing the country less risky by procedure betterments or airing with clean air. Intrinsic safety is a pattern where setup is designed with low power degrees and low stored energy, so that a mistake is improbable to put off an detonation. Equipment enclosures can be pressurized with clean air, and interlocked so that the equipment is disconnected if the air supply fails or arc-producing elements of the equipment can be isolated from the environing atmosphere by encapsulation, submergence in oil, sand, or by hardy enclosures that prevent extension of an internal detonation to the environing ambiance. As in most Fieldss of electro engineering, different states have approached the standardisation and testing of equipment for risky countries in different ways. As universe trade becomes more of import in distribution of electrical merchandises, international criterions are easy meeting so that a wider scope of acceptable techniques can be approved by national regulative bureaus. Standards regulating electrical equipment for usage in risky dust countries are altering so quickly that purchasers and users of electrical production equipment are happening it hard to maintain up. However, A by non maintaining abreast of the alterations, they run the hazard of a dust detonation happening in their works due to inadequately protected equipment and/or being prosecuted forA non-compliance or carelessness. The hazard of a dust or pulverization detonation happening in a fabrication works should non be underestimated. Around 2,000 dust detonations occur in Europe every twelvemonth, impacting all types of companies, including makers of sugar, coal, chocolate, flour-based goods, milk pulverization, tea, grain, fresh fish and baccy, every bit good as wood and metal processing companies. Any environment in which dust or pulverization is allowed to garner on hot surfaces or that could be ignited by a flicker from electrical equipment is a possible hazard. The cost, in footings of lives lost and harm to works, as a consequence of a dust detonation can be tremendous.2 Dust Explosion:Definition: Dust detonations occur when all right atoms dispersed in the air as a cloud react with O in the presence of an ignition beginning, bring forthing an detonation concatenation reaction. When this occurs in a changeless volume, there is a rapid and important addition in force per unit area. Prevention steps must be the first line of defense mechanism against such detonations, but in many state of affairss efforts to extinguish ignition beginnings are merely non plenty. Measures for extenuating the harm caused and the dangers posed to workers by eventual detonations are necessary. To assist vouch the safety of silo installings, companies in Europe are required to follow with the ATEX Directives sing explosive ambiances ( [ ATEX 1999/92/EC, 1999 ] and [ ATEX 94/9/EC, 1994 ] ) by put ining protection mechanisms.3 What is a dust detonation?Explosions are defined as sudden reactions affecting a rapid physical or chemical oxidization reaction, or disintegrate bring forthing an addition in temperature or force per unit area, or both at the same time. When the fire velocity is greater than the velocity of sound, we call it a explosion. Otherwise the detonation is known as a deflagration. Typically, dust detonations are comparatively slow burning procedures. If ignition occurs i n a dust cloud in an unfastened country, so small or no overpressure consequences and the primary jeopardy is a bolide. The best manner to acquire informations refering a specific type of dust is to make proving on the existent substance. Most written proficient resources on dust detonations have informations for the minimal explosive concentrations and other belongingss of common pulverizations.4 European Laws:In July 2006 a 2nd ATEX directive became compulsory European Standard EN 14491, 2006 EN 14491 for dust detonation venting protective systems and CEN ( 2006 ) .EN 14491 ( 2006 ) for the discharge of dust detonations came into force in 2006 and depict the basic design demands for dust detonation venting systems. This criterion is one of a series including criterions EN 14797 ( 2006 ) and EN 14460 ( 2006 ) on blowhole industry and detonation immune constructions. Together, these three criterions wholly cover dust detonation venting ordinances in Europe.5 Conditionss for dust det onation:As we all know detonation can merely happen, when three factors come together: 1. Flammable stuff ( in burnable measures ) 2. Oxygen ( in the air ) 3. Ignition beginning Fig.1 An detonation can merely happen, when these three factors come together Once the reaction is ignited, depending on how the exothermal energy is liberated, the consequences can be a controlled burning, fire moving ridge or detonation. All the protection methodological analysiss are seeking to extinguish one or more of the trigon constituents to cut down the hazard of lighting an detonation to an acceptable degree. To obtain an acceptable degree of hazard at least two independent events must be present, each one of low chance, before a possible detonation can happen. There are besides five necessary conditions for dust detonation to happen: a dust has to be combustible the dust is suspended in the air at a high concentration there is an oxidizer ( typically atmospheric O ) the dust is confined there is an ignition beginning Fig.2 Necessary conditions for dust detonation to happen The add-on of the two elements scattering and parturiency to the trigon ( see fig.1 ) creates what is known as the ââ¬Å" detonation Pentagon â⬠( see fig. 2 ) . An initial primary detonation ( see fig. 3 ) in treating equipment or in an country were fleeting dust has accumulated may agitate free more accrued dust or damage a containment system such as a canal, vas or aggregator. As a consequence, if ignited, the extra dust dispersed into the air may do one or more secondary detonations ( see fig. 3 ) . These can be far more destructive than a primary detonation due to increased measure and concentration of spread combustible dust. Fig. 3 Primary and secondary dust detonations If one of the elements of the detonation Pentagon is losing, a ruinous detonation can non happen. Two of the elements in the detonation Pentagon are hard to extinguish: O ( within air ) , and parturiency of the dust cloud ( within procedures or edifices ) . However, the other three elements of the Pentagon can be controlled to a important extent, and will be discussed farther in this papers.6 Facility Dust Hazard Appraisal:As I have mentioned above a combustible dust detonation jeopardy may be in a assortment of industries, including: nutrient ( e.g. , confect, amylum, flour, provender ) , plastics, wood, gum elastic, furniture, fabrics, pesticides, pharmaceuticals, dyes, coal, metals ( e.g. , aluminum, Cr, Fe, Mg, and Zn ) , and fossil fuel power coevals. The huge bulk of natural and man-made organic stuffs, every bit good as some metals, can organize combustible dust. The European`s Industrial Fire Hazards Handbook provinces that ââ¬Å" any industrial procedure that reduces a combustible stuff and some usually non-combustible stuffs to a finely divided province nowadayss a possible for a serious fire or detonation. â⬠7 Facility Analysis Components: Facilities should carefully place the followers in order to measure their possible for dust detonations: Materials that can be combustible when finely divided ; Procedures which use, consume, or produce combustible dusts ; Open countries where combustible dusts may construct up ; Hidden countries where combustible dusts may roll up ; Meanss by which dust may be dispersed in the air ; and Potential ignition beginnings.8 Beginnings of ignition:There are many beginnings of ignition and a bare fire need non be the lone one, a study shows that half of the dust detonations in Europe were from non-flame beginnings. Beginnings include fire hot surfaces clash curving from machinery or other equipment illuming work stoppages cutting and welding fires mechanical machinery As I mentioned earlier at the start of the study a differentiation is made between primary and secondary dust detonations. When a dust is found in a container, room or system component ignites and explodes we speak of a primary dust detonation. In a secondary dust detonation, dust that has settled on the land or on other surfaces is stirred by the primary detonation and ignites. As a consequence of this a concatenation reaction follows and the force per unit area wave emanating from the secondary dust detonation can stir up farther dust sedimentations and do farther dust detonations.9 Example of Historic Incidents:The undermentioned incident is an incident that marked the universe, in February 2008, a ruinous dust detonation occurred at the Imperial Sugar Refinery in Port Wentworth, USA. The dust detonation killed 13 people and injured many more. The undermentioned images below show the amendss of the refinery after the catastrophe ;10 Measuring the hazard:Identifying risky or non-hazardous countries should be carried out in a systematic manner. Risk appraisal should be used to find if risky countries exist and to so delegate zones to those countries. The appraisal should see such affairs as: the risky belongingss of the unsafe substances involved ; the sum of unsafe substances involved ; the work processes, and their interactions, including any cleansing, fix or care activities that will be carried out ; the temperatures and force per unit areas at which the unsafe substances will be handled ; the containment system and controls provided to forestall liquids, gases, bluess or dusts get awaying into the general ambiance of the workplace ; any explosive ambiance formed within an enclosed works or storage vas ; and, any steps provided to guarantee that any explosive ambiance does non prevail for an drawn-out clip, e.g. airing. Taken together these factors are the get downing point for risky country categorization, and should let for the designation of any zoned countries. The undermentioned paragraphs give farther information on what to see during an appraisal.11 The risky belongingss of unsafe substances:The belongingss of a unsafe substance that need to be known include the boiling point and brassy point of any flammable liquid, and whether any flammable gas or vapor that may be evolved is lighter or heavier than air. For dusts, information on atom size and denseness will be needed, one time it has been shown that a peculiar dust can organize an explosive ambiance. Often, relevant information is contained on a safety informations sheet provided with the merchandise.12 The size of possible releases:Some possible beginnings of release may be so little that there is no demand to stipulate a risky country. This will be the instance if the effect of an ignition following a release is improbable to do danger t o people in the locality. However, in the incorrect fortunes ignition of rather little measures of flammable gas/vapour assorted with air can do danger to anyone in the immediate locality. Where this is the instance, as in a comparatively confined location, from which rapid flight would be hard, country categorization may be needed even where rather little measures of unsafe substance are present. The size of any possible explosive ambiance is, in portion, related to the sum of unsafe substances present. Industry specific codifications have been published by a assortment of organisations to supply counsel on the measures of assorted unsafe substances that should be stored. For illustration,13 Temperatures and force per unit areas:Extra information associating to the procedure that involve the unsafe substances should besides be taken into history, including the temperatures and force per unit areas used in the procedure, as this will act upon the nature and extent of any release, and the extent of any subsequent risky countries. Some substances do non organize explosive ambiances unless they are heated, and some liquids if released under force per unit area will organize a all right mist that can detonate even if there is deficient vapor.14 Ventilation:Ventilation, either natural, or automatically ( e.g. produced by fans ) , can both dilute beginnings of release, and take unsa fe substances from an enclosed country. As a consequence there is a close nexus between the airing at any given location and the categorization and extent of a zone around a possible beginning of release. Well designed airing may forestall the demand for any zoned country, or cut down it so it has a negligible extent.15 Extent of risky countries:The appraisal needs to place countries within a workplace that are connected to topographic points where an explosive ambiance may happen. This will supply information on any countries off from the beginning of the jeopardy to which an explosive ambiance may distribute, for illustration through canals. Such countries should be included in the categorization system for topographic points where explosive ambiances may happen. An attack to measuring this hazard is described in BS EN 60079/10. A technique for forestalling this hazard is described in BS EN 50016, on pressurisation of enclosures or suites incorporating electrical equipment.16 Othe r considerations:When sing the potency for explosive ambiances, it is of import to see all unsafe substances that may be present at the workplace, including waste merchandises, residues, stuffs used for cleansing or care, and any used merely as a fuel. Besides some combinations of unsafe substances may respond together, organizing an ignition beginning, or in combination may organize an explosive ambiance, where singly this does non happen. Some perennial activities such as refuelling autos, or lading and droping oilers intended for usage on the public roads, involve the debut of possible beginnings of ignition into an country where a spill is possible, and which would run into the description of a risky country. In these fortunes, safety can be achieved by insulating power beginnings ( e.g. turning off engines, etc ) while a transportation is taking topographic point, and doing suited cheques before and after a transportation, before traveling a vehicle into or out of a risky country. Activities, such as care, may incur hazards non covered by the normal country categorization of the country where the activity is taking topographic point, for case the debut of beginnings of ignition into a risky country. Sometimes the unsafe substance can be removed before the care work activity starts. Sometimes, particular control steps can be taken to forestall the release of any unsafe substance during the work. In such instances the extra hazards associated with the activity should be assessed before work starts.17 Relationship between fires and detonations:In many instances where an explosive ambiance can organize, any ignition will do a fire instead than an detonation. Both fire and detonation cause dangers to workers, and in many instances the safeguards required to forestall an ignition are the same. The overall bundle of safeguards required will depend on the possible effects of a fire or detonation. Many factors influence the hazards from a fire affecting unsafe substances. In peculiar, employers should see whether a fire could take to an detonation, how fast a fire might turn, what other stuffs might be quickly involved, any dangers from fume and toxic gases given off, and whether those in the locality would be able to get away.18 Classifying risky countries into zones:Once an country has been identified as risky it should be classified into zones based on the frequence and continuity of the potentially explosive ambiance. This so determines the controls needed on possible beginnings of ignition that may be present or happen in that country. These controls apply peculiarly to the choice of fixed equipment that can make an ignition hazard ; but the same rules may be extended to command the usage of nomadic equipment and other beginnings of ignition that may be introduced into the country ( for illustration, lucifers and igniters ) and the hazards from electrostatic discharges. An international criterion, BS EN 60079/10, explains the basic rules of country categorization for gases and bluess, and its equivalent for dusts was published in 2002 as BS EN 61241/3. These criterions form a suited footing for measuring the extent and type of zone, and can be used as a usher to following with the demands in DSEAR. However, they can non give the extent and type of zone in any peculiar instance, as site-specific factors should ever be taken into history. Industry specific codifications have besides been published by assorted administrations and, provided they are applied suitably, they are valuable in promoting a consistent reading of the demands. Area categorization surveies normally take the signifier of drawings placing the risky countries and zones. Additional text gives information about the unsafe substances that will be present, the work activities that have been considered, and other premises made by the survey. Whenever such drawings and paperss have been produced, they should be included in the hazard appraisal record required by DSEAR. These paperss should be considered whenever new equipment is to be introduced into a zoned country. Hazardous topographic points are classified in footings of zones on the footing of the frequence and continuance of the happening of an explosive ambiance.Gass, bluess and mistsFor gases, bluess and mists the zone categorizations are: Zone 0 ââ¬â can be describes as a topographic point in which an explosive ambiance dwelling of a mixture with air of unsafe substances in the signifier of gas, vapor or mist is present continuously or for long periods or often. Zone 1 ââ¬â can be described as a topographic point in which an explosive ambiance dwelling of a mixture with air of unsafe substances in the signifier of gas, vapor or mist is likely to happen in normal operation on occasion. Zone 2 ââ¬â can be describes as a topographic point in which an explosive ambiance dwelling of a mixture with air of unsafe substances in the signifier of gas, vapor or mist is non likely to happen in normal operation but, if it does happen, will prevail for a short period merely.DustsFor dusts the zone categorizations are: Zone 20 ââ¬â can be describes as a topographic point in which an explosive ambiance in the signifier of a cloud of combustible dust in air is present continuously, or for long periods or often. Zone 21- can be describes as a topographic point in which an explosive ambiance in the signifier of a cloud of combustible dust in air is likely to happen in normal operation on occasion. Zone 22 -can be describes as a topographic point in which an explosive ambiance in the signifier of a cloud of combustible dust in air is non likely to happen in normal operation but, if it does happen, will prevail for a short period merely.19 Equipment in risky countries:Particular safeguards need to be taken in risky countries to forestall equipment from being a beginning of ignition. In state of affairss where an explosive ambiance has a high likeliness of happening, trust is placed on utilizing equipment with a low chance of making a beginning of ignition. Where the likeliness of an explosive ambiance happening is reduced, equipment constructed to a less strict criterion may be used. Equipment is categorised ( 1, 2 or 3 ) depending on the degree of zone where it is intended to be used. A figure of ways of building equipment to forestall ignition hazards have been published as consonant European Standards, and in some instances, extra demands are set out in the Standards associat ing to installing and usage. The risky country zone categorization and corresponding equipment classs are: Zone 0 or zone 20 ââ¬â class 1 equipment Zone 1 or zone 21 ââ¬â class 2 equipment Zone 2 or zone 22 ââ¬â class 3 equipment20 Marking of equipment:A standardized marker strategy is applied to place equipment suited for a specific location. Equipment built will transport the detonation protection symbol ââ¬Å" Ex â⬠in a hexagon, the equipment class figure ( 1, 2, or 3 ) , the missive G and/or D depending on whether it is intended for usage in gas or dust ambiances, and other indispensable safety information. In many instances this will include a temperature evaluation expressed as a ââ¬Å" T â⬠marker, and sometimes a gas group. These indicate restrictions to safe usage. Employers and those installing equipment should see the marker and certification provided with ââ¬Å" Ex â⬠equipment when it is being installed. All ATEX equipment will be required to transport three Markss. The CE grade The ATEX grade The Certification Code Additionally, it must be marked decipherably with the following minimal specifics: Name and reference of maker Appellation of series/type/model Consecutive figure Year of industryThe CE Mark:All ATEX equipment must transport CE grade ; the minimal tallness is 5mm. The CE grade confirms conformity with all the comparative Directives.The ATEX Mark:The ATEX grade ( EU Explosive Atmosphere symbol ) is a bluish hexagon incorporating the conventionalized letters ExThe Certification Code:All equipment points are required to transport the Certification Code as portion of their designation label.Log Table:Date 9/11/2009 I met up Mr. Jerry Duggan and discussed the importance of this undertaking and what country of jeopardies am I interested in to cover my undertaking. Date 11/11/2009 In my ain clip I got to seek the webs and happen out what is a dust detonation and what universe and European Torahs are out at that place to forestall these detonation from go oning and if they do go on due to unknown fortunes, how to carry on an detonation appraisal. Date 14/11/2009 I did some book research and reading from what was available in the library and what Mr. Jerry Duggan gave me and go really familiar with the factors that can take to an detonation. The book entitled ââ¬Å" Electrical Apparatus and Hazardous Areas â⬠became really ready to hand to understand the different zones for gas and blues, and dust jeopardies. Date 17/11/2009 After farther research in jeopardies I have decided to concentrate merely on one country preponderantly ââ¬Å" dust detonation â⬠. The meeting helped me understand how to near this country, which non many people know excessively much about. Date 19/11/2009 While making some internet research I came across a papers saying that half of the dust detonations go oning in Europe were from non-flammable beginnings. The beginnings that could take to an ignition were stated and an incident illustration was given. Date 21/11/2009 As a consequence of including an illustration of dust detonation that took topographic point in the USA, I wanted to show a hazard appraisal in order to find if risky countries exist in an enclosed country and so to delegate zones to those countries. Date 23/11/2009 I showed Mr. Jerry Duggan my up to day of the month research on dust detonation and advised me to seek and acquire a site visit which will profit me better on my stage research and the completion of the study. Date 24/11/2009 On this twenty-four hours I researched how would ventilation either of course or automatically ( produced by fans ) can both seek and extinguish beginnings of release and most of import take the unsafe substances from an enclosed country. Date 27/11/2009 Leaving unprecedented work unfinished from the day of the month of 14/11/2009 I wanted to lucubrate more on the designation of a hazard topographic point and the categorization into zones. Research had to be done to happen a definition on the zones categorization for dust. Date 30/11/2009 After farther desk research I met up once more and discussed the layout of my concluding twelvemonth presentation and a day of the month was set on the 10/12/2009 along with my assessor.Table of figures:The undermentioned figures are listed below as they appear in the study: Figure 1: An detonation can merely happen, when one of this factors come together Figure 2: Necessary conditions for dust detonation to happen Figure 3: Primary and secondary dust detonationsBooks:Electrical Apparatus and Hazardous Areas/Fifth Edition by Robin Garside Electrical Installation in Hazardous Areas by Alan McMillan Introduction to Intrinsic SafetyLinks & A ; Mentions:HBIRDPRO- # 692251-HOT Work HBIRDPRO- # 570000-Safety Signs HBIRDPRO- # 562514-Welding Thymine: TemplatesOH & A ; S ââ¬â Occupational Health & A ; SafetyPTW Hot Work Control Guide.dot Thymine: TemplatesOH & A ; S ââ¬â Occupational Health & A ; SafetyATW Hot Work Control Guide.dot OH & A ; S ââ¬â Occupational Health & A ; SafetyHazardous Area Check Sheet Equipment In Combustibles Dust Areas www.encoderonline.com/UK/Data-Sheets/Incremental/Data-14.htmDocuments:Corporate Standard Hazardous Areas Handbook for risky country solution No. 14 ââ¬â AB ââ¬â Iraqi national congress A cosmopolitan attack for hazardous-area categorizations A usher to European ( EEC ) enfranchisement for electrical equipment in risky countries DOE Handbook Electrical Safety 1998Web sites:www.rowanhouse.co.uk www.stackmasula.com.au www.intrinsicallysafe.com www.stahl.de
Friday, September 27, 2019
Critically assess Michel Foucault's contribution to the Essay
Critically assess Michel Foucault's contribution to the structure-agency debate - Essay Example Most sociologists, from Durkheim to Talcott Parsons and Radcliffe Brown focus on the standard structures of societies for explaining behaviour patterns. The wider acceptance of the social-structural explanations of identity is attributed to the fact that unlike an individualââ¬â¢s characteristics, social structure is represented by an elaborate conceptual framework (Cote & Levine, 2002: 46). However, it will be seen that sociologists such as Cooley, Blumer, Goffman and Garfinkel emphasise the significance of agency, the symbolic nature of human interaction and the ways in which humans negotiate roles and meanings on an on-going basis. According to Foucault, modern society is highly differentiated and fragmented. Power is not a commodity which can be acquired, nor is it the property of an individual or class, it is rather a structural phenomenon, an extensive network which is all-encompassing. Foucaultââ¬â¢s view of modernity is that there exist many centres of power, and connections between various areas of power. This approach is in contrast to the Marxist emphasis and focus on the class struggle and the state, as the centres of power. Further, the mode of production, the work and the industrial sphere that Marx identified as central to power, is different from the Foucaultian view of power as existing in several different social settings and locations (Layder, 2006: 125, 126). The intellectual movement of the eighteenth century, termed as the Enlightenment developed the concept of ââ¬Å"modernityâ⬠along with a range of disciplines which constitute the social sciences, forming the modern conception of knowledge (Billington, 1998: 6). Dawe (1970: 208) states that to solve the problem of social order the Hobbesian approach to human nature, which is: ââ¬Å"in the absence of external constraint, the pursuit of private interests and desires leads invevitably to both social and individual disintegrationâ⬠was taken into
Thursday, September 26, 2019
Financial institution Essay Example | Topics and Well Written Essays - 2750 words
Financial institution - Essay Example The remaining part represents the ââ¬Ërisk premiumââ¬â¢ where the market return earned in excess of the risk free rate is multiplied with the ââ¬Ëbetaââ¬â¢ of the stock. It is essentially the return for bearing additional risk (Investopedia, 2010). If the expected rate of return on a security is more than the required rate of return then the investment in profitable whereas if the expected return is less than the required rate of return then the investment is not profitable. Unlike Mean Variance Portfolio theory the CAPM model rewards for the excess beta or additional risk borne by the investor. Higher the beta higher is the compensation required by the security. As per this model a higher ââ¬Ëstandard deviationââ¬â¢ does not mean a higher return as ââ¬Ëbetaââ¬â¢ is the measure of risk under CAPM and not ââ¬Ëstandard deviationââ¬â¢. In the CAPM world an investor is rewarded for bearing the risk that cannot be diversified. This is referred as ââ¬Ësyste matic riskââ¬â¢ captured by the beta of the stock. An investor is not awarded for bearing any nondiversifiable risk i.e. unsystematic risk captured by the standard deviation of the stock. In other words the investors are rewarded for bearing the risk that cannot be diversified away. This is also referred as ââ¬Ëmarket riskââ¬â¢ (Sigman, 2005). Assumptions under CAPM- The first assumption under this model is that the transaction costs do not exist. This means that the purchase or sale of an asset does not require any cost. The second assumption is that the CAPM model assumes all assets to be infinitely divisible. This implies that an investor can take a position in the market irrespective of their wealth position. There exists no ââ¬Ëpersonal income taxââ¬â¢. This implies that an investor is not influenced by the nature of gain whether it is in the form of capital gain or dividend. There exists perfect competition. This means that a person cannot influence the stock pr ice by going long or short in it. The investors base their investment decisions on the standard deviations of returns and expected value on their investment portfolio. There is no limit on short selling. CAPM also assumes that there is unlimited lending and investing at the risk free rate. CAPM assumes homogeneous market expectations. The last assumption is marketability of all assets (Elton, et al., 2009, p.283). Beta Co-efficient The beta is the sensitivity of stock return to the market return. Higher the beta higher is the risk associated with the stock. Gitman (2006) states that beta is ââ¬Å"a measure of non-diversifiable riskâ⬠i.e. it measures the return on asset with reference to the market return. Ideally the beta of a stock should be ââ¬Å"forward-lookingâ⬠and measured with respect to the whole market, whereas in practice this is based on historical returns and the stock index acts as a proxy for ââ¬Ëmarket returnââ¬â¢ (Kurschner, 2008, p. 3). Suppose th e beta of Stock A is 2. In the event of a 10% rise or fall in the market the price of Stock A will rise or fall by 20% respectively. Stocks with a beta of more than one are referred as ââ¬Ëaggressive stockââ¬â¢ and stocks with a beta of less than one are referred as ââ¬Ëdefensive stockââ¬â¢. One can invest in aggressive stocks in times of market upswings and such stocks must be avoided in times of uncertain market conditions. In short the beta co-efficient of a stock measures the volatility in the return of a stock with respect to the market benchmark. Criticism of CAPM The assumptions of CAPM
Marketing Coursework Example | Topics and Well Written Essays - 250 words
Marketing - Coursework Example This individual would be old enough to own a credit card for making the purchases and is adventurous to try out new products/services because these make up most of the discounted offers. Groupon.com has carved out a unique market space, considering that it offers diverse products and services, which makes it difficult to evaluate whether it has traditional direct competitors. Of course its success has made numerous clones to pop up across the globe (Wauters, 2010) but it is possible that it still has market leadership in this new market space. Its major strengths are its brand as the trailblazer, its huge market presence, and its large financial backing of about US$ 1.2 billion. Its big weaknesses are that its business model is easy to replicate and therefore it may face difficulty in sustaining its first-mover competitive advantage. Groupon.comââ¬â¢s greatest opportunity is in the ease with which it can extend to more cities in the world. Currently it is leveraging its brand by extending its offering to willing collaborators through its Groupon Affiliate Program. Its major threat is the low barriers to entry or threat of forward integration posed by its suppliers. The macro-environmental climate appears favorable for Groupon.com.
Wednesday, September 25, 2019
Should we continue to import goods from China Research Paper
Should we continue to import goods from China - Research Paper Example s second perspective is the thought that protectionism (not allowing imports from China) will bring jobs that have been outsourced and entrusted to China back to the United States, resulting in a vibrant, more productive economy. It is a fact that nearly 200,000 American jobs have been displaced by Chinese imports (Scott) in Wal-Mart Corporation alone. Those who hold protectionism as the answer for creating jobs in America hold this example as an expression of an underlying truth: that imports need to stop in order for the economy to improve. However, what is the overall economic impact of saving these jobs? According to an OECD report, stopping imports from China will actually hurt the American economy, costing $2.16 for every $1 rise in tariffs and dropping world income by $0.73. When a country implements such policies, production does indeed come back to that country; however, since they cannot make those goods as efficiently, consumption decreases because prices go up. Less consumption means more costs and a return to the original problem. From an economic perspective, the protectionist argument against importing goods fails. The opposite perspective, that individuals have the right to choose between all available alternatives certainly seems valid, particularly in response to the analysis that ââ¬Å"open markets will be necessary for a sustained economic recoveryâ⬠(OECD). Trade with China is mutually beneficial for both parties and should continue until it stops naturally. OECD. "Trade and Economic Effects of Responses to the Economic Crisis." 2010. Organisation for Economic Co-operation and Development.
Tuesday, September 24, 2019
Implications of Health Economic Concepts for Healthcare Coursework
Implications of Health Economic Concepts for Healthcare - Coursework Example In the health care, accesses to medical services are always on high demand. However, there is a shortage of medical practitioners who can help in treating people (Edwards, 2001). This has an effect of increasing the medical costs that entrepreneurs will charge. This is because there is a shortage of medical practitioners, and the demand is high for the services of these practitioners. Another example is on generic drugs. Because of the many and great supply of these drugs, they are cheap when compared to the original version of these drugs (Ko, 2013). The law of supply and demand denotes that when supply is high, then the prices of the products will be low. The experiences of a variety of health care organizations are able to demonstrate the fact that the demand of health care services is not insatiable, and they are predictable. It is possible to predict the advice, appointment, or the message of a health care service provider, basing on time, population, and scope of the practice of the provider (Dalton, 2012). It is possible to anticipate periods of low or high demand by analyzing the demand data that is collected, based on the requests recorded in electronic health registers, or accounting books. An health care system can use these predictions for purposes of matching the supply of its services to the various needs of patients for a particular service (Lee and Kim, 2012). Most people believe that the demand for health care services is inelastic. For example if a person is sick, then he or she will not be very sensitive to price. A person suffering from malaria, typhoid, etc, will pay the price of medical treatment, irrespective on whether it is low, or high. However, the exception to this principles or rules touches on the purchase of eye glasses, plastic surgery, elective surgery, etc. These are considered luxurious health care services, and it is only for the preserve of the rich (Dalton, 2012). In
Monday, September 23, 2019
Long-Term Sources of Finance Essay Example | Topics and Well Written Essays - 2000 words
Long-Term Sources of Finance - Essay Example preference equity, common equity, debt and leasing. Long-term Finances A business needs funds for capital investments such as fixed assets like plant, machinery, land, building, furniture etc. These assets must be financed with long-term financing sources. The chief financial officer (CFO) is usually responsible for making suggestions to the senior management and board of directors related to financing issues. These suggestions and recommendations carefully analyze the advantages and disadvantages of each long-term financing option. After the decision is made by the senior management and the board, the CFO is responsible for obtaining the long-term finances. The common forms of long-term finances are preferred stock, common stock, long-term debt and leasing. A firm faces need of different types of finances through its various stages of development. A firm in its start-up generally avail funds from the banks for personal loans, government agencies and personal savings. During the rapi d growth phase a firm uses internally generated funds or direct financing. The direct financing includes loans from insurance company, commercial banks or pension funds and financing by venture capitalists. The maturity phase is financed by issuing equity or debt in primary markets. The firm in its final stage finances from internal sources while making debt repayments or buying back the common stock (Weaver & Weston, 2004, p.311-312). Figure 1: Financing Sources Source: (Weaver & Weston, 2004, p.312) Sources of Long-term Finance Sources of long-term finance differ with the type and size of the firm. There are mainly two categories of financing-Equity and Debt. The equity financing consists of two types of equity instruments, one is preference stock and the second is common stock. The debt financing can take two forms, first long-term debt from financial institutions and second in the form of leasing. Each financing option is discussed as follows: Preferred Stock Preference capital is a distinctive type of long-term financing which combines the features of both debt and equity. As a hybrid security it has a fixed rate of dividend and ranks higher than the common equity in terms of claims over the firmââ¬â¢s earnings. The preference shareholders do not have voting rights as the common shareholders have. Advantages: The preference dividends can be omitted in case of low or zero earnings. This provides the firm greater flexibility and chance of surviving a downturn. However skipping a dividend may reflect dim view of the firm in investorsââ¬â¢ community and may affect the share price as investors lose confidence and sell. Preference share capital is an additional source of capital which does not provide voting rights to the preference shareholders and therefore do not dilute the influence of ordinary shareholders. Fixed and limited preference dividends mean that the firms can retain or distribute common dividends in case of extra-ordinary earnings in a fisc al year. In case of limits on raising debts under the debt covenants, the preference share capital is a good alternative if a firm wants to expand raising external finance. Disadvantages: The high risk associated with capital and annual returns leads the preference shareholders to demand higher return than debt holders. The preference dividends are regarded as distribution of profits. Therefore they are not tax deductible. In comparison to this the lenders are not owners and so their interests are regarded as the expense
Sunday, September 22, 2019
Native americans Essay Example for Free
Native americans Essay Native Americans are known for many different qualities they had as a part of their lifestyle. Native Americans have been living in the Americas for many years. During their time period, we learned so much from them. Most of the information that was found, was by the movie ââ¬Å"The Last of the Mohicansâ⬠and the three origin myths. There are many different Native American tribes that factor out cultural differences, in which usually includes nature, hybridity, and a culture clash. Nature is one of the main aspects that Native Americans show respect to. In the movie ââ¬Å"The Life of the Mohicansâ⬠the Mohicans, one of the Native American tribes, show respect to the animal that they killed by giving thank you to him. Sometimes nature can be a bad thing, in which it surrounds the characters and complicates their battles and their chances for survival. In the movie, the Mohicans used nature in order to track their enemies, which in this case the Hurons In the origin myths, nature was what started this world and created mankind. Many Native Americans now in days still show respect for nature. There were many kinds of hybridity shown in the movie. Hybridity is the mixing of separate elements into one whole. Hawkeye is an example of hybridity because white by blood but Indian by habit. In the novel, Cora is a hybrid because her mother was black and her father was white. When nature and culture collide it makes a hybridity, just like what the Mohicans did in the movie. By the end of the nineteenth century, hybridity became very popular by rapid developments in genetic. When the Native Americans lived in the Americas, they were not alone. There was a culture clash between the Native Americans and the Europeans. In the movie, the Hurons and the Europeans did not get along. The Europeans would take by force the Native Americans Most of the Europeans killed the Native Americans for no particular reason. At the end, the ones getting involved in the small battle were the Mohicans and the Hurons. Even though both of the tribes were related, there were some differences that they had. Native Americans were well known for their culture and different lifestyles. The Native Americans had many beliefs of their different gods. The Native Americans had different tribes, but they all show respect to nature, some kind of hybridity, and the culture clash that they were involved in.
Saturday, September 21, 2019
Chromatography Separation of Dye Mixture
Chromatography Separation of Dye Mixture Chromatography is a technique used to separate the components of a mixture 1. There are two phases in chromatography, the stationary phase (absorbed solvent) and the mobile phase (moving solvent). The process of chromatography involves passing a mixture dissolved in a mobile phase through a stationary phase. Since each phase has a different distribution coefficient, the components travel at a different rate and thus get separated. The two commonly used techniques of chromatography are thin layer chromatography, TLC, and column chromatography. Thin layer chromatography is used to determine the purity of a substance, to identify, and is used to determine solvent system for separations of mixtures. This technique is especially useful in determining optimum conditions for separating compounds by column chromatography 1. On the other hand, column chromatography is used on a much larger scale. It is used to separate mixtures made of two or more compounds. During column chromatography, thes e components are separated many times between the stationary phase and the mobile phase. The purpose of conducting this experiment was to determine the suitable solvents for the various components in a mixture of 1:1 methylene blue and fluorescein dye. The two eluting solvents used in the experiment were 1:12:14 mixture of K2SO4: CH3CN and 95% ethanol. The experiment allowed us to identify the effects of the two different solvents on the different dye mixtures. The effect can be observed from the retention factor, Rf, which is a ratio of the distance traveled by the sample to the distance traveled by the solvent 2. Different conclusions can be drawn up from the Rf value, a high Rf value would indicate that the substance is less polar and has traveled a greater distance and a low Rf value would indicate the opposite. The two dye mixtures used in the experiment are methylene blue and fluorescein. Based on the properties of the two substances, the alternate hypothesis that methylene blue will have a higher retention factor compared to fluorescein can be stipulated. It can also be hypothesized that since fluorescein is more polar than methylene blue it will dissolve in the more polar solvent and travel a greater distance. Results The distance traveled by each dye mixture, the R- value, is shown in Table 1 and Table 2. These R-values are used to calculate the Rf values for each mixture, which are also shown in Table 1 and Table 2. The Rf values for the mixtures in 1:12:14 K2SO4:H2O:CH3CN are 0.76, 0.70 and 0.75 for fluorescein, dye mixture and methylene blue respectively. The Rf values for the mixtures in 95% ethanol are 0.057, 0.32 and 0.34 for fluorescein, dye mixture and methylene blue respectively. As indicated in the tables above, both the eluting solvents, 1:12:14 K2SO4:H2O:CH3CN and 95% ethanol separated impurity on the TLC plate. The Rf values are similar with the Rf values found by other experiments. M.B Naff and A.S Naff found the Rf values of fluorescein to be 0.85 and the Rf value of methylene blue to be 0.02, when the eluting solvent used is a ratio of 2:2: 1 methyl ethyl ketone: acetic acid: isopropyl alcohol 1. Table 3 shows the elution of the fluorescein and methylene blue, with methylene blue eluting first followed by fluorescein. Discussion Thin layer chromatography was used to determine the most suitable solvent system for the separations of the mixtures. From the data gathered, it was observed that both fluorescein and methylene blue traveled a further distance on the chromatogram when the solvent 1:12:14 K2SO4: H2O:CH3CN was used, as compared to the distance traveled when the solvent being used was 95% ethanol. This shows that the solvent 1:12:14 K2SO4: H2O:CH3CN is more polar than 95% ethanol since in the solvent 1:12:14 K2SO4: H2O:CH3CN both the polar dye mixtures dissolve (like attracts/ dissolves like) and travel a further distance. The polarity of the elutent forces the compounds to the top of the place, because the compounds dissolve well and do not interact with the stationary phase. In TLC, the adsorbent (stationary phase) is thinly spread onto a flat sheet of supportive plastic. The mixture to be separated is applied onto the stationary phase about 1 cm from the bottom ofà the chromatographic sheet. The sheet is then placed into a developing chamber containing theà mobile phase. The mobile phase rises up the chromatography sheet by capillary action. As theà mobile phase proceeds up the sheet, the components of the mixture are retained in variousà degrees by the stationary phase. The chemical composition of the stationary phase and theà mobile phase play a significant role in how far the components travel up the chromatographicà sheet. In column chromatography, a glass column is packed with a solid stationary phase. The mixtureà to be separated is applied at the top of the column. The mobile phase descends by gravityà through the column. The components of the mixture to be separated have different properties. The rate at which the components descend through the column depends on several factors. Theà component is retained by the stationary phase to a certain extent depending on the properties ofà the stationary phase and the properties of the component. The solvation power of the solvent alsoà affects the rate of elution. The rule of like dissolves like applies here. The individualà components, with different affinities for the stationary phase and the mobile phase, areà continuously absorbed onto the stationary phase, solvated by the mobile phase eluting throughà the column, reabsorbed onto the stationary phase, etc. The speed at which the components travel through the column is directly related to the number of absorption-elution cycles that occur. Therefore a balance between the solvation power of the mobile phase and the absorption powerà of the stationary phase determines how fast each individual component travels through theà column.1,2 Think of a piece of wood floating down a creek. If there is a lot of grass growing in the stream,à the wood will get caught in the grass for awhile, then it will break loose and flow down the creekà a short distance, get caught in some more grass or rocks, break free again, and continue thisà process until it has made its way down the creek. Aluminum cans will travel down the creek atà different rates than the wood based on the amount of time they are retained by the grass. If thereà is no grass in the creek, the piece of wood and aluminum can will both reach the end of the creekà WRONG!!! From the data gathered it can also be observed that the polar dye mixture, fluorescein ascended quickly when the solvent 1:12:14 K2SO4: H2O:CH3CN was used. This is primarily because the nonpolar compounds stick to the stationary phase, while polar compounds separate and travel upwards with the solvent. From the TLC plates, it is indicated that different compounds in the mixture travel a t different rates; polar compounds travel quickly while lesspolar compounds travel more slowly. The stationary phase was the substrate alumina which is considered to be a polar substance since the surface consists of polar (OH) groups. The moving phase is the solvent system that, moves up the stationary alumina coated plate. All solvent systems will be considered non-polar relative to the silica adsorbent. Potential problems leading to yield loss- In between two sand layers some impurities were trapped and on top of alumina fluroscien dye stayed. The 95% ethanol and mixture of blue dye dripped through columns down the container and collection of this clear mixture ended when solvent was colourless. Then sodium hydroxide was used to wash out the fluorescien dye into a separate beaker which caused the purple impurities to move down the cotton. This might be due to the thin layers of sand used or excessive solvent. However, this can be prevented by lowering the time it may take the dye to come down the column by increasing the air pressure from above (Still et al., 1978). Potential improvements to the process or problems with the experiments However, this can be prevented by lowering the time it may take the dye to come down the column by increasing the air pressure from above 3. The two dyes methylene blue and sodium hydroxide were used to separate fluorescien dye with ethanol in second part, column chromatography. References (1) Naff, M.B., Naff, A.S. 1963. TLC on microscope slides: An organic chemistry experiment. J.Chem. Educ.40 (10). pp 534, 535. (2) Schmidt-Tarub, H.2005. Preparative chromatography of fine chemicals and pharmaceutical agents. Wiley-VCH Verlag GmbH Co. kGaA, Germany. Pp131 (3) Still, W.C., Kahn, M., Mitra, A., 1978. Rapid chromatographic technique for preparative separations with moderate resolution. The Journal of Organic Chemistry.Ãâà 43Ãâà (14). pp 2923-2925. (4) Poole, C.F. 2003. The essence of chromatography. Elsevier, United State of America. Pp.337 (5) Heftman, E. 2004. Chromatography 6th edition fundamentals and applications of chromatography and related differential migration methods. Elsevier, Netherlands. Pp. 549. Questions What would happen if the level of the solvent in your TLC chamber was higher than the spots at the bottom of your TLC plate? If the level of the solvent in the TLC chamber was higher than the spots at the bottom of the TLC plate then the spots would dissolve away. If the level of the solvent in the TLC chamber is deeper than the baseline, then the solvent will dissolve the compounds instead of allowing them to ascend the thin layer by capillary action. If this were to occur, in the end you would not see the spots after the plate is developed. As a drawing exercise, provide the structures of the dyes used in this experiment.**Knowing what you saw in class about intermolecular interactions, circle the groups on each molecule that are liable to interact with the partially acidic, surface Alà ¢Ã¢â ¬Ã OH and Sià ¢Ã¢â ¬Ã OH groups on alumina or silica in neutral solvent. Fluorescein: Molecules that are liable to interact with the partially acidic, surface Al- OH and Si- OH Methylene Blue: One of the solvents used contained aqueous NaOH. This will generate Alà ¢Ã¢â ¬Ã O- and Sià ¢Ã¢â ¬Ã O- groups on alumina or silica, and these will be in competition with the solvent for interactions with the analyte. What will this solvent do to the mobility of the dyes? Although the experiment you performed used the most common chromatography techniques, there are many other types of chromatography. One technique is called ion exchange chromatography, especially useful in biochemical work. Briefly describe the principle behind ion exchange chromatography and what it can accomplish. Ion exchange chromatography is a separation technique based on charges. It is used to separate ions and other charged molecules. There are two types of ion exchange chromatography, cation exchange chromatography and anion exchange chromatography. In cation exchange chromatography positively charged molecules are attracted to a negatively charged solid support and in anion exchange chromatography, negatively charged molecules are attracted to a positively charged solid support 4. In ion exchange chromatography the mobile phase, usually water or an organic solvent, is of low conductivity, which helps in the binding of the molecules 4. As the compound is passed through, like charges repel and elute first and opposite charges attract and elute last. The strength of the interaction is determined by the number and location of the charges on the molecule and on the functional group.Ãâà By increasing the salt concentration the molecules with the weakest ionic interactions start to elute from the column first 4. This type of chromatography is essentially important in the separating and isolating carbohydrates. It is also important in separating small inorganic and organic ions 5.
Friday, September 20, 2019
History of Japanese Art Essay -- Art History, Japan
Throughout many centuries, art has portrayed an exceedingly dominant role in Japanese culture. These forms of artwork varied from everything from pottery to clay figurines. Overall, the majority of Japanese art was and still is considered to be of high importance in Japanese history. However, the most intriguing and unique form of art was the Isho-ningyo and Iki-ningyo dolls, otherwise known as the "fashion doll" and the ââ¬Å"living dollâ⬠. Both the Isho-ningyo and the Iki-ningyo were merely two of the plentiful assortment of dolls created by the famous Japanese artisan, Goyo Hirata, as items of ââ¬Å"luxurious indulgence.â⬠The Kintaro doll of Isho-ningyo type or Iko-ningyo type illustrates the significant advancements in Japanese doll art throughout history with the newfound technologies and composition attributed in each period. Japanese art has been practiced since 4,000 BC, otherwise known as the Jomon period. The Jomon is particularly known for creating the first forms of Japanese pottery. Although the Jomon period was thought to produce relatively simple artwork, the people of the Jomon were also the first to show the evolution of Japanese dolls. Essentially, this gradual step towards this treasure form of art was the Dogu, humanoid figures. Jomon period art gradually advanced throughout time with from the first creation of simple pottery, to storage vessels, and lastly to Dogu. Mainly, the technologies used during this time period consisted of clay, while the composition also consisted of simplistic designs such as coiling. This Japanese time period demonstrates the true beginning of the tr... ...ecause of the overall historical background and basic artistic characteristics. Although, the Isho-ningyo and the Iki-ningyo are not a part of the modern day era, they still show significant advancements that will eventually point the way towards modern day Japanese art. These particular dolls show aspects of modern day art characteristics because of their complexity in structure and overall appearance. Each Japanese period contributes the steps towards the qualities that make up modern Japanese art, but the particular artwork of the Isho-ningyo and the Ikià ¬ningyo are the greatest contributors. Works Cited "Japanese Art." Columbia Electronic Encyclopedia, 6th Edition, (2011): 1-2. BALFOUR, R, and S BALFOUR. "Japanese Dolls." Arts of Asia, 6.4 (1976): 67-74. Rimer, J. Thomas. "High Culture in the Showa Period." Daedalus, 119.3 (1990): 265- 278.
Thursday, September 19, 2019
Graduation Speech: Importance of Change :: Graduation Speech, Commencement Address
Change is a word that I have constantly heard throughout my high school years. It is a transformation through which everyone goes whether it's for the better or for the worse. For me the meaning and value of change has helped me to focus on the goals I have to accomplish. For others, it is simply just a phase we go through. All of us here have been able to learn and develop from our changes to be come a better and successful person. Motivation is an important source of help towards succeeding. We can receive it from our family, friends, and our teachers. The one thing that I have realized about the alternative school is that the teachers and staff will never give up on you. In most public schools the teachers tend to give up easily on a failing student because they don't have the time and opportunity to get to know you and work with you. It is different here at Rose Alternative High School. The teachers continue to push you to work harder, to never give up. Friends have the biggest impact and influence in our lives. They can lead us to the path of success or path of failure. So everything that our parents have told us about choosing the right friends is absolutely true. As you get older, you realize that everything your parents have said or have taught you starts to make sense. You are more aware about situations and are a lot more careful so that you don't make mistakes like we often did when we were younger. Age is not a factor when it comes to completion. As you can see, many of us are a lot older than others. Most of us took different steps in achieving this goal. Some took a few months while others took a few years. But even though we arrived here with different routes, we will all receive the same prize for finishing, which is a high school diploma. This quote from William Arthur Ward reflects upon me and maybe even others here: "If you can imagine it, you can create it.
Wednesday, September 18, 2019
Coal Extraction and Black Lung :: Environment Energy Essays
Coal Extraction and Black Lung Coal is an indispensable fossil fuel that is very important to todayââ¬â¢s society. With out coal, one would have to live without many of the luxuries we have today. There would be no lights to light a house, no movie cinemas, no electrical heaters, and no televisions or phones. ââ¬Å"Coal has many important uses, but most significancy in electricity generation, steel and cement manufacture, and industrial process heating. Coal provides over 23% of global primary energy need and generates about 39% of the worldââ¬â¢s electricityâ⬠(Source 1). Coal is also used as fuel for steam locomotives, to make synfuels, and in home heating. Some other miscellaneous items made by coal are insecticides, paint thinners, batteries, disinfectants, varnish and insulin. (Source 2) Coal, obviously, is very important to our society and we cannot do without it. The extraction of coal from the ground, however, can be a dangerous process that has serious health effects. The ways coal has been extracted from the ground has changed many times over time due to improved mining techniques and different geological formations. In the early history of mining a technique called bell pitting was used where the coal was ââ¬Å"obtained by digging it from where it appears on the surfaceâ⬠. This method was replaced by more efficient methods. Today, ââ¬Å"the three methods of extraction are open cast, drift and deep mineâ⬠(Source 3). These methods are not safe and many miners who work with these methods suffer many health problems. Coal miners suffer from many different health problems that are caused from mining. Among these diseases is the well known Black Lung. ââ¬Å"Black Lung is a legal term describing man-made, occupational lung diseases that are contracted by prolonged breathing of coal mine dust. Call in minerââ¬â¢s asthma, silicosis, pneumonoultramicroscopicsilicovovanoconiosis, coal workerââ¬â¢s pneumoconiosis, or black lungââ¬âthey are all dust diseases with the same symptomsâ⬠(Source 4). Black Lung usually effects workers who are over 50 and who have worked as a miner for most of their lives. The symptoms of black lung are coughing, spitting, and breathlessness. Another symptom is that the lung has black pigmentation on it. ââ¬Å"In Severe cases, an enlargement and strain of the right side of the heart may occur. This is caused by chronic lung disease. The strain on the heart may eventually cause right side heart failure.
Tuesday, September 17, 2019
Commentary on Wilfred Owenââ¬â¢s ââ¬ÅDulce Et Decorum Estââ¬Â Essay
In this commentary, we will take a deep look into this poem that Wilfred Owen wrote. In the poem, a group of soldiers are described, and their emotions. Using three guiding questions, this will be an introduction into the way Owen writes his poems. Answering these guiding questions will give the reader the full package that the poem has to offer. The first guiding question that is to be answered is: How are the feelings amongst the soldiers described? First of all, one can say the soldiers all feel as if they were torn apart. This is notable in the way the soldiers ââ¬Ëcursed through sludgeââ¬â¢, and how the ââ¬Ëmen marched asleepââ¬â¢. Despite their fatigue, the group of men still have a strong bond, as they did not think only of themselves while shouting ââ¬Ëgas! GAS! Quick, boys! ââ¬â¢. This explains they are prepared to share their senses, and not keep them to themselves only. The bond between the soldiers is also notable when they all watch their mate slowly die, while they can do nothing about it. The way the soldier feels while seeing his friendââ¬â¢s death, makes him (and probably his mates) feel that dying for their country, and seeing others die, isnââ¬â¢t all that honourable. The second aspect of the poem that needs to be looked at is the atmosphere that the writer calls up. This atmosphere can be described as a dynamic one. It goes from the gray and darker mood to a fast-paced one, while ending in the depressing situation of a friendââ¬â¢s death. The gray and dark atmosphere is found in the way the soldiers ââ¬Ëlimped on, blood-shodââ¬â¢ through the land. The group was ââ¬Ëdrunk with fatigue,ââ¬â¢ and didnââ¬â¢t have the energy to walk in a faster pace. In line 9 however, the mood shifts as the ââ¬Ëgreen seaââ¬â¢ of gas approaches the soldiers. Described as an ââ¬Ëecstasy,ââ¬â¢ the men fought against the time and put on their helmets as soon as possible, to avoid death. The poem starts itââ¬â¢s depressing atmosphere in line 15, where the soldiers behold the death of their friend. They want to do anything to save him, but were hopeless, so they ââ¬Ëflung him inââ¬â¢ the wagon, and watched ââ¬Ëthe white eyes writhing in his face. ââ¬â¢ Owen leaves the reader with the same emotions the soldiers felt, the fact that they felt betrayed by their country. Lastly, a look needs to be taken into the poetic devices in the poem, and how they contribute to the message. The most notable thing in this area is the way Owen shocks the reader. The message itself describes ââ¬Ëthe old lieââ¬â¢ that dying for your country would be sweet and fitting. Owen wants the readers to understand how many people really care for one soldierââ¬â¢s death. In the last paragraph itââ¬â¢s almost clearly stated how one would feel while dying for their country. The dying soldier leaving behind ââ¬Ëhis hanging face, like a devilââ¬â¢s sick of sinââ¬â¢ would give an image of how he would be dying his painful death. The reader could imagine the pain the soldier has, and how the other soldiers around him would feel. These three given answers on the guiding questions should give you a more in depth look into the poem, and give one understanding to the questions the reader might have himself.
Monday, September 16, 2019
Descartes methods of doubt Essay
?In this paper, I will be examining Rene Descartesââ¬â¢ reasons for doubting all of his beliefs. I will begin with Descartesââ¬â¢ first meditation, showing how he argues his reasons of doubt. Followed with Descartesââ¬â¢ second meditation, presenting the one piece of knowledge that Descartes finds irrefutable and explaining why he believes it to be so. Descartes formulates three different skepticisms while reflecting on a number of falsehoods he was led to believe throughout his life. Upon reflection, Descartes decides that he must establish a new foundation of beliefs, he declares, ââ¬Å"I must once for all seriously undertake to rid myself of all the opinions which I formally acceptedâ⬠(Descartes, p. 17). Descartes decides that if there is any reason to doubt one of his present beliefs, then the belief as a whole must be rejected. Descartes starts with his beliefs, which he has come to through his own senses. It is hard to doubt oneââ¬â¢s own senses but Descartes acknowledges that even the most trusted senses have the ability to be deceitful. For example, when I look up at the sun it appears to be relatively small, but in reality the sun is much larger then I perceive it to be. Therefore, my sense of sight is not completely accurate, which then causes me to doubt my sense of sight. Unless the object in view is close at hand, then how could I possibly doubt that the object exists? Descartes finds reason for doubt even with objects up close. To argue this claim he formulates his dream hypothesis to prove that our senses can still be misleading even in cases like this, he states ââ¬Å"I have in sleep deceived by similar illusions, and in dwelling carefully on this reflection I see so manifestly that there are no certain indications by which we may clearly distinguish wakefulness from sleepâ⬠(Descartes, p. 18). When Descartesââ¬â¢ senses fail in separating the two states, his trust in his senses are doubted because his senses cannot differentiate dreams from reality. It is this doubt that leads Descartes to the realization that beliefs derived from senses cannot be fully trusted, and in fact proves that there may not be any physical matter as all. Descartes dives even deeper into the role of senses in dreams, as well as art; stating ââ¬Å"Things which are represented to us in sleep are like painted representations which can only have been formed as the counterpart of something real and trueâ⬠(Descartes, p. 18). This shows that what we perceive to be real is the driving force behind our imagination. Furthermore, our dreams spawn from our imaginationsââ¬â¢, which means that our dreams consist of only thing that we perceive to be real. Now looking back to what I previously stated, if our senses cannot be trusted to differentiate dreams from reality then how can I be sure that Iââ¬â¢m not asleep at this very moment and that I am only dreaming of typing on a laptop. Aside from Descartes disbelief in his own senses, Descartes doubts the validity in sciences. Descartes justifies this uncertainty with his evil genius hypothesis; he says, ââ¬Å"Some evil genius not less powerful than deceitful, has employed his whole energies in deceiving meâ⬠(Descartes, p. 19). This quote suggests, it is possible that our foundations of math and science are false, and that all beliefs may be deceptions. This skeptical hypothesis is arguably the most powerful of all skeptical hypothesizes. With this premise, doubt can be found in any belief that can be conceived and Descartes concludes that nothing has ever existed. After Descartes attempts to rid himself of all belief that he considers to be false he is left with to many doubts to forget, Descartes expresses his emotions by saying, ââ¬Å"I had all of the sudden fallen into very deep water, I am so disconnected that I can neither make certain of setting my feet on the bottom, nor can I swim and so support myself on the surface. â⬠(Descartes, p. 133). We can see the mixed emotions Descartes experiences with this statment. I believe that this disconcert stems from the fact that Descartes now doubts everything he knew and once believed to have validity. I also believe that it is this distress that led him to unearth the one piece of knowledge that he is unable to deny. After much thought, Descartes realizes that the only belief he cannot deny is that he himself exists. Descartes then states, ââ¬Å"But there is some deceiver or other, very powerful and very cunning, who ever employs his ingenuity in deceiving me. Then without doubt I exist also if he deceives meâ⬠(Descartes, p. 134). This quote displays to me that Descartes knows that if he is able to be deceived, by whom ever it may be, then in fact he must exist because if he did not exist then he would not be able to be deceived. Therefore, Descartes finally finds validity in a belief, which he vitally needs at this time of conflicting thought upon all of his former beliefs. In conclusion, Descartesââ¬â¢ doubt in all of his believes is formed through his skeptical hypothesizes, beginning with senses are deceiving at a distance, which doubts sizes and shapes at a distance when perceived, but not up close. Following with his dream hypothesis, which can doubt things up close facilitated by the imagination, but cannot doubt truths of mathematics and sciences. Closing with the evil genius hypothesis, which is able to doubt mathematical facts such as a square having four sides, but this final hypothesis brings the one undisputable belief of existence.
Sunday, September 15, 2019
Dick Spencer Case Essay
Spencer was a plant manager of Modrow Company, a Canadian Branch of the Tri-American Corporation. Tri-American was a major producer of primary aluminum with integrated operations ranging from mining of bauxite through the processing to fabrication of aluminum into variety of products. The company had also made and sold refractories and industrial chemicals. The parent company had wholly owned subsidiaries in five separate United States locations and had foreign affiliates in fifteen different countries. Tri-American employed approximately 22,000 employees in the total organization. The company was governed by a board of directors. The board set general policy, which was then interpreted and applied by the various plant managers. This decentralization in organizational structure increased the freedom and authority of the plant managers, but increase the pressure for profitability. Spencer started his career in Tri-American Corporation as salesman and he succeeded. After two years of successful work as salesman, he became the symbol of what salesman have to be. In his career in Tri-American, he had worked as salesman, troubleshooter, assistant plant manager in English branch in London UK, plant manager in Birmingham in UK and his last position was plant manager of Modrow company in Canada. It was another challenging position in his career and he had faced few problems regarding to management, organization culture, organization conflict and organization innovation. â⬠¢ Spencer was a plant manager of Modrow Company, a Canadian Branch of the Tri-American Corporation. â⬠¢ Tri-American was a major producer of primary aluminum with integrated operations ranging from the mining of bauxite through the processing to fabrication of aluminum into a variety of products. The company had also made and sold refractories and industrial chemicals. The parent company had wholly owned subsidiaries in five separated US locations and had foreign affiliates in 15 different countries. Tri-American employed approximately 22,000 employees in the total organization. The company was governed by a board of directors, which included chairman, vice chairman, president and 12 vice presidents. Subsidiaries and branches are organized as independent companies and decisions are decentralized. â⬠¢ The Modrow Branch was located in a border town in Canada. The total work force in Modrow was 1,000. This Canadian subsidiary was primarily a fabricating unit. Its main products were foil and building products such as roofing and siding. Problem: 1. Resistance to change by employees, this problem shows when Dick as the plant manager asked the worker why he was using the saw when the material could easily be bent fifted into the barrels, resulting in saving time and equipment. And then the worker said ââ¬Å"Weââ¬â¢ve never done it that way, sir. Weââ¬â¢ve always cut itâ⬠. After all the power saw are removed from the scalp area in order to adjust new method of bending rather than cutting. A few day later Dick find out that workmen using hand shears to cut each strip to cut. 2. Process of Production Problems. In his new position as Plant Manager at Modrow, he found that construction was slower in completion than originally planned; equipment arrived before the building was finished, employees were upset about the extent of change expected in their work routines with the installation of additional machinery, and in general morale was at low ebb. 3. Culture Change Problem; there is the difference between American and British philosophy and performance within the plant. Here, he also found that his power and authority were less than those of his superiors, so he constantly found himself in the position of having to soft pedal or withhold suggestions that he would have liked to make, or innovations that he would have liked to introduce. After a frustrating year and a half, Dick was suddenly made plant manager of an old British company which had just been purchased by Tri-American. He left his first English assignments with mixed and moved from London to Birmingham. In Birmingham, he become a plant manager and operated much as he had in his troubleshooting job for the first couple of years of his change from sales to administration. He did some changes in Birmingham. Training and reduction programs were instituted for all supervisors and managers who survive the initial purge. He tried to focus/ control on relationship between production and the needs from sales by simplifying and redesign in order to increase profit. Later the company showed a small profit for the first time in many years. For this successfulness, then he requested transferred back to United States. 4. Cost Reduction Problem, by the end of his first year at Modrow, the building program had been completed, although behind schedule, the new equipment had been installed, and some revamping of cost procedures had been incorporated. But, the financial picture at this time showed as a loss. Later, all managers of the various divisions had worked closely with their supervisors and accountants in planning the budget for the following year. 5. Human Relations/ Interaction Problems When he worked through his first year as plant manager, Dick developed the habit of strolling around the organization. He was apt to leave his office and appear anywhere on the plant floor, in the design office and at the plant cafeteria rather than in the executive dining room, or wherever there was activity concerned with Modrow. At first his presence disturbed those who noted him coming and going, but later, the workers came to accept his presence and continue their usual activities. Supervisors, managers, and foreman, however, did not feel as comfortable when they saw him in the area. 6. Different corporate culture in Canada, even though Canada is located in same geopolitical areas, geographically and nationally Canada is different country and corporate culture is bit different from USA. And Dick Spencer is American manager who started his career in USA. As we can see from the case, Dick Spencer is basically very stunning to adapt different corporate culture in different countries such as UK and Canada plant career. We can see it from this sentence: ââ¬Ëâ⬠¦ In recalling his first year at Modrow, Dick had felt constantly pressured and badgered. He always sensed that the Canadians he worked with resented his presence since he has brought in over the heads of the operating staffââ¬â¢. At the same time he felt this subtle resistance from his Canadian work forceâ⬠¦Ã¢â¬â¢. 7. Organization conflict in Modrow plant, there was an obvious conflict between workers and Dick Spencer. We can see it from this sentence: ââ¬Ëâ⬠¦ In recalling his first year at Modrow, Dick had felt constantly pressured and badgered. He always sensed that the Canadians he worked with resented his presence since he has brought in over the heads of the operating staff â⬠¦Ã¢â¬â¢. In the other words, other workers couldnââ¬â¢t live up with Dickââ¬â¢s arrival in the company. 8. Corporate innovation management, at the time of Dick Spencerââ¬â¢s arrival in the Modrow Branch, there was a lack of good corporate innovation management. We can see it from this sentence: ââ¬Ëâ⬠¦ Prior to Dickââ¬â¢s appointment as plant manager at Modrow, extensive plans for plant expansion and improvement had been approved and started. Altough he had not been in on the original discussions and plans, he inherited all the problems that accompany large-scale changes in any organization. Construction was slower in completion than originally planned, equipment arrived before the building was finished, employees were upset about the extent of change expected in their work routines with installation of additional machinery, and, in general, morale was a low ebbâ⬠¦Ã¢â¬â¢ 9. Decentralization, basically this is American organization type and American one is more formalistic than European. Decentralization is basically increase the pressure from parent company management. We can see it from this sentence: ââ¬Ëâ⬠¦ This decentralization in organizational structure increased the freedom and authority of the plant managers, but increased the pressure for profitabilityâ⬠¦Ã¢â¬â¢ 10. Lack of leadership for Dick Spencer, in terms of organization leader Dick Spencer shouldnââ¬â¢t include the all the works in the organization. He tried to do it by himself every single things and he aimed to attend every action. In terms of HRM, this is not good character for the good Leader. We can see it from this sentence: ââ¬Ëâ⬠¦ As he worked through his first year as plant manager, Dick developed the habit of strolling around the organizationâ⬠¦Ã¢â¬â¢. This created the conflict between him and workers. Also this creates dis-approvement from workers. We can see it from this sentence: ââ¬Ëâ⬠¦Supervisors, managers and foreman, however didnââ¬â¢t feel as comfortable when they saw him in the areaâ⬠¦Ã¢â¬â¢ 11. Lack of knowledge in Human resource and accounting knowledge, these two courses were disadvantage for Dick Spencer in this study in MBA and these two are very important for any organization. In the other way, he can find and hire someone who can do his unknowledgeable fields such as accounting and HR. 12. Too high expectation from management made pressure, we can see it from this sentence: ââ¬Ëâ⬠¦he believed that the president and his friends in the home office were constantly on the alert, waiting for Dick to prove himself or fail flat on his faceâ⬠¦
Saturday, September 14, 2019
Of Mice And Men: Symbolism Essay
In the novel, of mice and men, theer was symbolizm throughout the story. In the beginning of the novel the stting was perfect, like ââ¬Å"The Garden of Edenâ⬠. LIke in ââ¬Å"The Garden of Edenâ⬠there was a snake, and in this novel it slipped across the water sggestin possible evil to come. The rabbits on the other hand symoloized Lennyââ¬â¢s joy and goodness, and formed the bases of his dreams. In the beginning Of Mice and Men, the story began looking like a perfect world. The author describes the setting as a wonderful place where ââ¬Å"willows fresh and green with every spring: .(p.1) the perfect world resembles : The garden of Edenâ⬠, how everything was in place and the surroundin was in paradise.â⬠ON the sandy bank under the trees the leaves lie â⬠¦.among themâ⬠.(p.1) It was a wonderful place to be, because the setting is peaceful and no evil or wrond doing is happening. The snimals do not live in fear because the setting is perfect and it sounds accomadating to everyone and everything. All thought the setting was perfect in the beginning, there must be evil to come. As the snake was in ââ¬Å"The garden of Edenâ⬠as a form of evil, there should be a form of evil to come further in the story. Teh form of evin that appars in the setting is a snake. The snake also appeared in ââ¬Å"The garden of Edenâ⬠, and if so tehre must be some sort of evil to come. When the snake slipped across the pool, it examined the scene like a submarine would when hunting down itz prey. The snake must of picked itââ¬â¢s target, like a submarine would. ââ¬Å"a water snake alipped along on the pool, itââ¬â¢s head held up like a little periscopeâ⬠.(p.7) And that someone that the snake targeted must have been Lenny, because he dies at the end of the story. As the snake slipped across the pool ââ¬Å"the reeds jerked slightly in the currentâ⬠. (p.7)When the snake moved across the pool and the reeds started to jerk, symbolizing the peaceful world being disrupted by an evil form. Moreover, the snake symbolizes evil and the negative energy in the story, but the dreams of rabbits and the farm, they symbolize good and bring positive energy to the story and Lennyââ¬â¢s mind. Teh rabbits in the story symbolize Lennyââ¬â¢s innocent side. They also are a positive enery in the story. When the setting was described in theà beginning, the rabbit appeared showing that they are a positive energy. ââ¬Å"Rabbits comout of the brush to sit on the sand in the eveningâ⬠.(p.1)Also the rabbits are a symbol of Lennyââ¬â¢s innocent side, because the rabbits do not mean to harm anyone but only are there to comfort Lennyââ¬â¢s caring side. The rabbits were also in Lennyââ¬â¢s dream of teh farm. All he wanted to do was to tend to the rabbits on the fam. ââ¬Å"And I get to tend the rabbitsâ⬠.(p.105)The dream of having a farm and rabbits was what drove Lenny in life. And when George would describe the farm again and again Lenny would become happy inside, and would picture the farm in his head. Nevertheless, Lennyââ¬â¢s dreams did not come true/was he dead at the end, of the story. In conclusion, symbolism is used throughout the whole story, And ââ¬Å"The garden of Edenâ⬠was a perfect world and so was the setting until the snake appeared. The snake was a form of evil and he disrpted the setting with his presence. The dream of the farm and tending to the rabbits was a wonderful dream, where Lennyââ¬â¢s imagination would go to when George told him of the farm.
Friday, September 13, 2019
Cheim weizmann Term Paper Example | Topics and Well Written Essays - 750 words
Cheim weizmann - Term Paper Example Weizmanââ¬â¢s special talent in chemistry got revealed when he went to Germany and got admitted at the Polytechnic Institute of Darmstadt. Later he went to Switzerland and became a part of the University of Freiburg. The man who later displayed a successful political career was primarily engrossed with his studies at the earlier part of his life. Weizmann was awarded the doctorate in Chemistry in 1899 and two years later joined university of Geneva as an assistant lecturer. His excellence in chemistry was doing wonders in his career as in three years of time he joined University of Manchester as a senior lecturer. In personal life Chaim Weizmann was married to Vera Weizmann and the loving couple had two sons. Tragedy struck the Weizmann family when their younger son who was by profession a pilot of a fighter plane was shot down while flying and succumbed to the accident (Krane). Before discussing the political career of this great achiever, it is worth providing little more attent ion towards Weizmann the chemist. As mentioned earlier that he has moved to University of Manchester as a senior lecturer in chemistry in 1904. In 1910 he took British nationality and being a part of the Manchester University discovered how bacterial fermentation can be used to desired level to produce the determined level of similar substances. Weizmann is highly regarded as the father of industrial fermentation. The Weizmann organism or Clostridium acetobutylicum bacteria produced acetone within laboratory framework that later became important fuelling Allied war efforts (Dixon, 53). If he had contributed through the commercial production of acetone during the First World War, during the Second he got busy with synthetic rubber and high octane gasoline. Weizmann was highly regarded in England as one of the forefront chemists of his time and both during the First and Second Great War adorned with honorary posts to the British Military. Chaim Weizmann no doubt was an active chemist who had extended his helping hands towards the allied force during the First and Second Great War; yet at heart he was a strong believer in peace and considered science as the harbinger of the same ââ¬Å"I feel sure that science will bring to this land both peace and a renewal of its youth, creating here the springs of a new spiritual and material life. And here I speak of science for its own sake and applied science.â⬠(Spender 4) The academic and political career of this great soul ran on simultaneous track. While in Manchester he became a prominent Zionist leader and a regular attendee at the Zionist conferences. Weizmann is credited to have convinced the then British foreign minister Balfour (Balfour Declaration) on setting a Jewish homeland at Palestine, which was the long cherished Zionist demand. The man who later became the first President of Israel visited Palestine for the first time in 1907 (Isseroff). Though he was one of the founding members of the Palestine Land Development Company yet his inherent leadership and upright nature gets reflected through these words ââ¬Å"A state cannot be created by decree but by the forces of a people and in the course of generations. Even if all the governments of the world gave us a country it would only be a gift of words. But if the Jewish people will go and build Palestine, the Jewish State will become a realityââ¬âa fact.â⬠(Weizmann and Litvinoff, 301) Weizmann like a true leader had also tried to maintain a
Thursday, September 12, 2019
Assessed assignment 2 - Data Analysis Exercise Essay
Assessed assignment 2 - Data Analysis Exercise - Essay Example The plural form of ââ¬Ëtimeââ¬â¢ is used in English but in specific contexts and with different connotations. Lot of ââ¬â the speaker has used this term to qualify both count as well as non- count nouns. He seems to prefer this term and has never used ââ¬Ëveryâ⬠or ââ¬Å"manyââ¬â¢ as native speakers would have done. One children, a children ââ¬âWe do find subject verb agreement between ââ¬Å"areââ¬â¢ and ââ¬Ëchildrenââ¬â¢. The speaker says, ââ¬Å"there are only one children.ââ¬â¢ For the native speaker, it is an irregular plural but the speaker has mis-analysed the form, hence his use of one/a is consistent with his treatment of this form as singular. We can conclude that for speaker A, children is semantically singular but syntactically plural. The bare verb form is used as nominals where native speakers would use ââ¬âing form for deriving nominals from verbs in these contexts. When ââ¬âing forms of verbs are used as nouns or adjectives they are called gerunds. Own ââ¬â this word sounds more or less like earn. Perhaps, the speakers have never come across the word in writing or have never learnt it as an item of vocabulary, but may have just heard the word from others in speech. Hence they replaced it by the similar sounding word that they knew. Independent, independence ââ¬â Both have made a different kind of mistake and both are incorrect. When natives speak about being independent of something, there is an implication that it was a nuisance or troublesome. It cannot be said about parents. The speaker B uses the noun form where the adjective form should be used. From the use of the above regular and irregular plurals, we can conclude that speaker B uses these words correctly and target like. He seems to have understood the count noun singular ââ¬âplural contrast. CONCLUSION ââ¬â The two speakers are similar in the way they diverge from the expected target forms in some respects, and different in other respects.
Wednesday, September 11, 2019
The Impact of the Shortage of Affordable Housing on Homelessness Essay
The Impact of the Shortage of Affordable Housing on Homelessness - Essay Example Of this goes up housing is considered expensive and creates problems hardships for the family or individual. Affordable housing can be defined as a housing scheme which costs a household a maximum 30% of their incomes. If the cost of housing increases beyond 30% then the families are considered to be in a position where they have difficulty in affording all the basic necessities of life which includes food, shelter, medical care and transport facilities. In the United States, a number as large as 2 million are burdened with basic necessities of life as they are paying more than 50% for their housing cost out of their annual salary. This is to say that a household with one bread owner who earns a minimum wage can in n o way afford a two bedroom house/apartment in accordance with the prices prevailing in the market. (Development, 2008 ) Intermediate housing is that kind of housing in which the rent paid by the tenant is lower than the market price but it is higher than the social rent. It does not include low cost market housing but shared equity products in addition to intermediate rent are included. Over the years, the budget of the US Housing Urban Development (HUD) has decreased by a substantial amount. From $83 billion in 1976 it dropped to around $ 18 billion in 1983 and has been around $30 billion ever since. There were around 400,000 affordable housing units in 1976 and by 2002 only 25,900 were left. Still the HID added only a mere 7,635. This is very less with respect to the demand and over the years the number of households or people in need for affordable housing have increased rather than decreased. (Council, 2007) More than 60% of extremely low-income households spend more than 30% of their income on housing - exceeding HUD's affordability standard. (Without Housing: Decades of Federal Housing Cutbacks Massive Homelessness and Policy Failures.) According to HUD standards, housing that costs half or more of household income is severely unaffordable or "a severe cost burden." (Development U. D., 2003) The cost of renting a house is beyond the financial capacity of a lot of people in United States today. As the income remains constant, the housing rents have shot up. Hence there is a big gap between increase in spending and more or less no significant increase in the amount of money earned by individuals making it more difficult for the low income brackets to afford a house on a rental basis. Shortage of affordable housing increased to a great extent the risk of homelessness. Some of the policies on affordable housing include the local authorities should in advance plan out the housing needs of their community or jurisdiction including those who cannot afford it easily. A community should be planned in such a way that it should have a mix of housing which accommodates those who can afford bid houses as well as those sectors who need affordable prices. Regional Planning Guidance for Yorkshire and the Humber to 2016 (RPG12) outlines its approach to affordable housing in Policy H4 Housing Size, Type and Affordability. The policy requires targets for the provision of affordable housing in each district to be informed by evidence from local
Tuesday, September 10, 2019
Recruitment and Staffing Proposal Coursework Example | Topics and Well Written Essays - 1000 words - 1
Recruitment and Staffing Proposal - Coursework Example I will also suggest three detailed selection approaches that the company may consider when performing a cost-benefit analysis for each process. My final duty will be to recommend to you the best method that suits the business and solves its human resource challenges. Highly qualified staff is fundamental to ensure high performance of any organization (Joseph, n.d). However, finding the best employees depends on the methods of recruitment adopted by the firm. The problem of staffing proves even more challenging in this era than what it was in the past because of the shifting dynamism in employment patterns. Challenges also emanate in relation to matching organizational performance with the demand levels of the institutions (Joseph, n.d). Most of the problems of dynamism in employment result from high levels of competition in the job market. There is, therefore, a requirement that businesses consider adopting the best recruitment approaches, which will ensure the best employees in management positions. There are varied methods used when recruiting employees, which depend mostly on organizational needs. One such method is gamification, which involves posting of virtual problems and inviting potential candidates to solve (DeMarco, 2014). The method borrows from graphical computer games, which may serve as both an advertisement and staffing plan. The methodââ¬â¢s success may result from the fact that it targets a particular job skill. The cost-benefit analysis for this rationale gives the company a challenge of designing skill-specific games for use in recruitment. Using the same approach may select the best candidates for the required skills and at the same time, introduce as particular product or service of the firm as an advert. Another approach is the Go Undercover Technique, which gives the selected candidates time long enough to prove their worth (DeMarco, 2014). Such a method is a matter of chance,
Subscribe to:
Posts (Atom)